The ARC Series E-Class Network Adapters

The Myricom ARC Series E-Class Network Adapter
An Industry-leading Interface for Financial Trading and Packet Capture.

 

The E-Class uses an optimized combination of hardware, FPGA firmware and software libraries to deliver application specific functionality in a cost-effective package.

E-Class

For Automated Financial Trading

The E-Class with DBL is financial trading’s lowest latency full function 10 GbE network adapter. in a Windows environment. Unique features for up to 4 sources per feed and extremely accurate timestamping accuracy of 1 microsecond, prepares trading systems for compliance with the rigorous reporting defined in the MiFID II regulations.

For Network Monitoring and Security

Enabled by Sniffer10G, the E-Class delivers pure packet capture functionality in a cost-effective package. By pure packet capture we mean it delivers on three critical requirements:

  1. Zero packet loss
  2. Extremely accurate timestamping
  3. Essential packet capture functions, including time-based merge, filtering and load balancing, all with strictly limited server impact.

One Hardware Platform

The hardware platform is identical for both functional areas, with DBL and Sniffer10G delivering the unique application capabilities. The large FPGA on the E-Class enables continual enhancements as market demands evolve.

Enhanced Timing Features

  • Timing synchronization: PPS and 10 MHz connections are available on the timing kit to enhance timestamp accuracy by linking to external oscillators or GPS devices
  • Support for Arista Networks DANZ timestamping: Arista switches can optionally add timestamps to packet traffic flowing through the switch, using proprietary extensions to the IP standard that Sniffer10G and DBL software can decode. This allows applications to use the time packets entered a local network rather than the time they enter the network adapter.

Features

  • Very accurate time stamps as well as inputs for 1 PPS and 10 Mhz timing signals
  • FPGA to enable a stream of future enhancements from CSPi
  • Two or four 1 G or 10G ports using SFP+ cages (for bandwidths higher than 25Gbit, we recommend using a broker to load balance between ARC adapters)

Specifications

Bus Interface PCI Express Gen 3, 8 lanes wide
Form Factor All D and E Series ARC adapters are low-profile PCI Express x8 add-in cards that ship with a standard height faceplate installed and a low profile faceplate in the box. C-Class adapters are also available in BladeCenter and PC-104 form factors.
Electrical Power 25 watts or less for all models.
Environmental Recommended that adapters be installed into servers that provide some airflow over the PCIe slots (very common). Use in an office or computer room environment. Rugged variants for telecom or defense applications are available.
Throughput Sniffer10G provides 100% lossless packet capture and injection for all Ethernet packet sizes. Supports the maximum possible 10G packet rate of 14.8 million packets per second.
Timestamp Stability Time stamp stability is determined by the on-board oscillator (a Vectron VT 804 TCXO) or by any optional, user-provided 10 MHz clock. The adapter has a 10 MHz input and repeater for connection with other modules.
IEEE 1588 Myricom time stamps are captured in a manner that allows IEEE 1588 software implementations to deliver highly accurate, synchronized time.
Software Support The Sniffer10G packet capture capabilities can be leveraged through the popular libpcap (Linux) or WinPcap (Windows) library or directly through the Sniffer10G SNF API, which is available as a set of C programming language functions. Using a SNF-aware libpcap/WinPcap, users reference a Myricom ARC Series 10G network adapter through its Ethernet interface name, and can run existing libpcap/WinPcap-dependent applications, relying on libpcap/WinPcap’s portable interface. For more advanced usage, the SNF API can be directly targeted by user applications. In both usage cases, network access via the SNF interface to the ARC Series 10G network adapter, rather than via the standard kernel access, provides higher performance.
Connections C-Class: Dual SFP+ 10GbE ports; 10GBase-T, XFP and CX4 available on some versions. D-Class Dual SFP+ 10GbE ports (configured as dual QSFP with bundled SFP+ adapters) E-Class: Dual or Quad SFP+ 10GbE ports.

Downloads

Visit our Download Center for the latest software, as well as other resources such as user guides and FAQ documents.

General Operating Capabilities

Packets Per Second Every adapter optimized for ultra-low latency will bump into a maximum packet-per-second rate when the packets hit Intel’s PCIe implementation. That maximum depends on the Intel chip at the other end of the PCIe bus. Expect about 22 M PPS.
On-board clock tick precision The process associating timestamps with packets has ±5 nanoseconds of uncertainty. If you elect to synchronize with an external time source (“trim the clock”), that process has ±10 nanoseconds of uncertainty.
Timestamp Stability Timestamp stability is determined by the on-board oscillator (a Vectron VT 804 TCXO) or by an external 10 MHz clock connected via an optional timing kit.
IEEE 1588 Time stamps are captured in a manner that allows IEEE 1588 software implementations to deliver highly accurate, synchronized time.
Virtualization The E-Class adapter is compatible with all popular virtual environments, provided that users assign the adapter to a single virtual machine. The alternative, sharing an adapter, conflicts with delivering high performance.

Automated Financial Trading Capabilities

Financial Trading Firmware and Software Support The DBL combination of tightly integrated FPGA firmware and software drives down Tick-To-Trade latency at multiple points in the trading process, allowing applications to deliver higher fill rates. It moves packets into the host computer with the lowest possible latency, then sends those packets directly to specific CPU cores, bypassing the kernel entirely. It also stages TCP market orders or quotes in advance to further reduce latency.
DBL End Points Support for 32 simultaneous rings (DBL endpoints). The size of each ring is limited by the amount of host memory available. Support of up to 511 simultaneous UDP multicast groups open per Ethernet port (1022 per board).

Packet Capture Capabilities

Throughput Sniffer10G provides 100% lossless packet capture and injection for all Ethernet packet sizes. Supports the maximum possible 10G packet rate of 14.8 million packets per second.
Software Support The Sniffer10G packet capture capabilities can be leveraged through the popular libpcap (Linux) or WinPcap (Windows) library or directly through the Sniffer10G SNF API, which is available as a set of C programming language functions. Using a SNF-aware libpcap/WinPcap, users reference a Myricom ARC Series 10G network adapter through its Ethernet interface name, and can run existing libpcap/WinPcap-dependent applications, relying on libpcap/WinPcap’s portable interface. For more advanced usage, the SNF API can be directly targeted by user applications. In both usage cases, network access via the SNF interface to the ARC Series 10G network adapter, rather than via the standard kernel access, provides higher performance.

Regulatory Approvals, Compliance

Emissions Emissions and safety authorities do not certify board-level products. They certifyc omplete systems with all boards installed. To minimize risk for OEM customers, CSPi uses a third-party certification organization to test its Myricom adapters installed into a generic PC. Final test reports are available to customers. We meet US, Canadian, and European emissions, Class A.
Compliance RoHS (Reduction of Hazardous Substances)
Country of Origin USA

Warranty and Support

One year for hardware defects and 90 days for software defects. 90 days of “getting started” telephone and email support, as well as any software upgrades shipped within that window. Refer to the support datasheet for options extending the 90-day window

Order Details

Please see below:

Product Number Model Number Product Description
18-13010 10G-PCIE3-8E-2S+DBL Dual SFP+ board using K35 FPGA with DBL license. Full height bracket pre-installed.
18-13014 10G-PCIE3-8EL-2S+DBL Dual SFP+ board using K35 FPGA with DBL license. Low profile bracket pre-installed.

Configuration Options with Sniffer10G

Product Number Model Number Product Description
18-13011 10G-PCIE3-8E-2S+SNF Dual SFP+ board using K35 FPGA with SNF license. Full height bracket pre-installed.
18-13013 10G-PCIE3-8E-4S+SNF Dual SFP+ board using K35 FPGA with SNF license. Full height bracket pre-installed.

Resources and Related Content

Resources

 

News

November 21, 2024
F500 Electric Energy Producer Selects ARIA AZT PROTECT™ to Stop Dangerous Cyberattacks

ARIA’s AZT PROTECT™ zero trust solution provides a lock-down approach to protecting critical infrastructure applications from attack, with a focus on stopping all forms…

July 31, 2024
ARIA Cybersecurity Announces It Has Become a WWT Supplier

ARIA Cybersecurity Solutions, a CSPi business (NASDAQ: CSPi), has been selected by Worldwide Technology (WWT) to supply its award-winning, AZT PROTECT™ solution to its…

July 26, 2024
ARIA Cybersecurity to Highlight Impact of Industrial Cybersecurity Attacks at Rockwell Automation Fair

ARIA Cybersecurity Solutions, a CSPi business (NASDAQ: CSPi), has been selected update the industry on how to measure the cybersecurity risks facing industrial operations—and…