The ARC Series C-Class Network Adapters

The Myricom ARC Series C-Class Network Adapter

 

The C-Class hardware platform is the basis for the industry’s lowest cost packet capture solution, delivering zero packet loss across the full range of Ethernet packet sizes in combination with Sniffer10G software.

C-Class
A C-Class adapter enabled by Myricom MVA software provides the highest performance solution for GigE Vision capable cameras in machine vision applications. The MVA software accelerates frame receipt and reduces CPU overhead to virtually nothing.
For Automated Trading applications, the C-Class with DBL software drives down system-level Tick-To-Trade latency and enables advanced financial trading capabilities.
For content creation applications and storage connectivity, the C-Class Adapters offer the highest performance in their class. Support for a broad range of operating systems enables the C-Class to be used in all types of solutions.
The ASIC found on Myricom SmartNIC adapters allows the offering of specialized firmware that supports a transmit only (data-diode) network path. A Myricom adapter with this firmware allows for the creation of a unidirectional security gateway. For maximum security the receive connections are physically removed.

Features

  • Industry’s lowest cost pure packet capture device based upon the proven Myricom LANai ASIC
  • Available in multiple form factors: low-profile PCIe and PC/104
  • One or two 10G ports in either SFP+ or 10GBASE-T or XFP or CX4, the broadest range of 10G options on the market

Specifications

Bus Interface Dual Port – PCI Express Gen 2, 8 lanes wide
Single Port – PCI Express Gen 1, 8 lanes wide
Form Factor Low-profile PCI Express x8 add-in cards that ship with a standard height faceplate installed; and a low profile faceplate in the box.
Electrical Power 25 watts or less for all models.
Environmental Recommended that adapters be installed into servers that provide some airflow over the PCIe slots (very common). Use in an office or computer room environment. Rugged variants for telecom or defense applications are available.
Throughput Sniffer10G provides 100% lossless packet capture and injection for all Ethernet packet sizes. Supports the maximum possible 10G packet rate of 14.8 million packets per second.
Timestamp Stability Time stamp stability is determined by the on-board oscillator (a Vectron VT 804 TCXO) or by any optional, user-provided 10 MHz clock. The adapter has a 10 MHz input and repeater for connection with other modules.
IEEE 1588 Myricom time stamps are captured in a manner that allows IEEE 1588 software implementations to deliver highly accurate, synchronized time.

Downloads

Visit our Download Center for the latest software, as well as other resources such as user guides and FAQ documents.

Order Details

Please see below:

Model Number Product Description
10G-PCIE2-8B2-2S+SNF3 Dual Port, 10Gb/s Ethernet, PCI Express Gen2 x8 adapter with SFP+ sockets for 10GBase-SR and LR modules, Direct Attach Copper and EOE Cables (transceiver, cable not included) and Sniffer10Gv3 Software
10G-PCIE2-8C2-2S+SNF3 Dual Port, 10Gb/s Ethernet, PCI Express Gen2 x8 adapter with SFP+ sockets for 10GBase-SR, LR, and LRM modules, Direct Attach Copper and EOE Cables (transceiver, cable not included) and Sniffer10Gv3 Software
10G-PCIE2-8C2-2S-SYNC+SNF3 Dual Port, 10Gb/s Ethernet, PCI Express Gen2 x8 timecode-enabled adapter with SFP+ sockets for 10GBase-SR LR, and LRM modules, Direct Attach Copper and EOE Cables (transceiver, cable not included) and Sniffer10Gv3 Software
10G-PCIE-8B-S+SNF3 Single Port, 10Gb/s Ethernet, PCI Express Gen1 x8 adapter with SFP+ sockets for 10GBase-SR and LR modules, Direct Attach Copper and EOE Cables (transceiver, cable not included) and Sniffer10Gv3 Software

Configuration Options with DBL

Model Number Product Description
10G-PCIE2-8B2-2S+DBL3 Dual Port, 10Gb/s Ethernet, PCI Express Gen2 x8 adapter with SFP+ sockets for 10GBase-SR and LR modules, Direct Attach Copper and EOE Cables (transceiver, cable not included) and DBL3 Software
10G-PCIE2-8C2-2S+DBL3 Dual Port, 10Gb/s Ethernet, PCI Express Gen2 x8 adapter with SFP+ sockets for 10GBase-SR, LR, and LRM modules, Direct Attach Copper and EOE Cables (transceiver, cable not included) and DBL3 Software
10G-PCIE2-8C2-2S-SYNC+DBL3 Dual Port, 10Gb/s Ethernet, PCI Express Gen2 x8 timecode-enabled adapter with SFP+ sockets for 10GBase-SR, LR, and LRM modules, Direct Attach Copper and EOE Cables (transceiver, cable not included) and DBL3 Software
10G-PCIE-8B-S+DBL3 Single Port, 10Gb/s Ethernet, PCI Express Gen1 x8 adapter with SFP+ sockets for 10GBase-SR and LR modules, Direct Attach Copper and EOE Cables (transceiver, cable not included) and DBL3 Software

Other Configuration Options

Model Number Product Description
10G-PCIE-8B-S-TO Network adapter with a Single SFP+ 10GbE port that provides transmit only capability. (Firmware for Tx Only operation and Physical receive path removal)
10G-PCIE-8B-S Single Port, 10Gb/s Ethernet, PCI Express Gen1 x8 adapter with SFP+ sockets for 10GBase-SR and LR modules, Direct Attach Copper and EOE Cables (transceiver, cable not included) and Myricom Content Creation Software
10G-PCIE2-8C2-2T Network Adapter with Dual 10GBase-T Ports, 10Gb/s Ethernet, PCI Express Gen2 x8 and Myricom Content Creation Software
10G-PCIE2-8C-T Network Adapter with Single 10GBase-T Port, 10Gb/s Ethernet, PCI Express Gen2 x8 and Myricom Content Creation Software
10G-PCIE2-8C2-2S Dual Port, 10Gb/s Ethernet, PCI Express Gen2 x8 adapter with SFP+ sockets for 10GBase-SR, LR, and LRM modules, Direct Attach Copper and EOE Cables (transceiver, cable not included) and and Myricom Content Creation Software

OEM

Model Number Product Description
10G-PCIE-8B-S-TO Single port 10G Intelligent Adapter configured to support 1 transmit only 10G network interface.
SPT-10G-PCIE-B-S-TO Annual support for single port 10G Intelligent Adapter configured to support 1 transmit only 10G network interface. Includes software updates and email support.
OEM Datasheet See OEM product datasheet.

Other Details

Cables and transceivers Contact your Account/Sales representative for more information on cables and transceivers that are compatible with each adapter.
Warranty and add-on support Three years for hardware defects and 90 days for software defects. 90 days of “getting started” telephone and email support, as well as any software upgrades shipped within that window. Refer to the support datasheet for options extending the 90-day window.

Warranty and Support

Three years for hardware defects and 90 days for software defects. 90 days of “getting started” telephone and email support, as well as any software upgrades shipped within that window. Refer to the support datasheet for options extending the 90-day window.

Downloads

Visit our Download Center for the latest software, as well as other resources such as user guides and FAQ documents.

Contact Us to Speak to a Cybersecurity Expert!

Resources and Related Content

Resources

 

News

November 21, 2024
F500 Electric Energy Producer Selects ARIA AZT PROTECT™ to Stop Dangerous Cyberattacks

ARIA’s AZT PROTECT™ zero trust solution provides a lock-down approach to protecting critical infrastructure applications from attack, with a focus on stopping all forms…

July 31, 2024
ARIA Cybersecurity Announces It Has Become a WWT Supplier

ARIA Cybersecurity Solutions, a CSPi business (NASDAQ: CSPi), has been selected by Worldwide Technology (WWT) to supply its award-winning, AZT PROTECT™ solution to its…

July 26, 2024
ARIA Cybersecurity to Highlight Impact of Industrial Cybersecurity Attacks at Rockwell Automation Fair

ARIA Cybersecurity Solutions, a CSPi business (NASDAQ: CSPi), has been selected update the industry on how to measure the cybersecurity risks facing industrial operations—and…